-->
VENUES AND SYSTEMS
FEATURED PROJECTS
50M Swimming Pool
PAS recently completed work on a new pool and leisure centre successfully installing public address and intercom systems.

view more...
Hospital and Clinics
Contracted to a NHS Trust, PAS have recently supplied access control and CCTV systems to a busy hospital and clinic site.
view more...
Town Hall Complex
PAS have recently completed the supply and installation of a large emergency PA system to a very busy and highly occupied local authority headquarters in the City of London.
view more...
A-2120 Mixer Amplifer
A-2120 Mixer Amplifier - 120 watts
A-2120E Amplifier

Suitable for commercial audio systems in schools, offices, shops, restaurants, factories, houses of worship, and large meeting rooms.
Equipped with balanced mic. inputs for better isolation from external noise, compared to unbalanced inputs.

  • Cost effective and durable mixer power amplifier.
  • 3 Mic / 2 Aux inputs, plus one recording output.
  • Individual input volume controls plus master volume control.
  • Voice-activated mic takes precedence over other inputs.
  • Built-in current limiter and thermal protection circuit.
  • AC mains or DC operation.
  • 600 Ohm, balanced, inputs.
  • Make contact-activated muting function.

 
 
<
Power Source 220 - 240V AC or 24V DC
Rated Output 120W
Power Consumption 124W (EN60065), 260W(AC operation at rated output, 8A (DC operation at rated output)
Frequency Response 50 - 20,000Hz (+/- 3 dB)
Distortion Under 1% at 1kHz,1/3 rated power
Input MIC 1: -60db 600 ohm,electronically balanced, 5-P Din type. MIC 2,3:-60db 600 ohm,electronically balanced, 5-P phone jack. AUX 1,2: -20dB, 10k ohm, unblanced, RCA pin jack. Mute: Contact Pin 4 - 5 Closure input (for MIC 1)
Output SPEAKER OUT:Balanced (floating)
HIGH IMPEDANCE:120W (100V)
LOW IMPEDANCE: 4ohm (15.5V)
REC. OUT: Odb, 600Ω unbalanced, RCA pin jack
Phantom Power DC + 21V (MIC 1)
S/N Ratio Over 60dB
Tone Control Bass: +/- 10 dB at 100k Hz Treble: +/- 10 dB at 10k Hz
Muting MIC1: Mutes other signals by 0 - 30 dB attenuation
Indicator Power signal, peak
Finish Panel: ABS resin, black/Case: Steel plate, black
Dimensions 420 (W) x 100.9 (H) x 360.3 (D) mm
Weight 10kg
   
Download (PDF) A-2120 Product brochure and specification
   
  Product video for the A-2000 range of amplifiers
   

 

Back to Amplifiers page