PAS recently completed work on a new pool and leisure centre successfully installing public address and intercom systems.
Contracted to a NHS Trust, PAS have recently supplied access control and CCTV systems to a busy hospital and clinic site.
PAS have recently completed the supply and installation of a large emergency PA system to a very busy and highly occupied local authority headquarters in the City of London.
CMS20T ceiling speaker
The CMS20T 2-way square flush mount loudspeaker can be used as a 16 Ohm or 100 Volt loudspeaker.
In 16 Ohm use, connect up to 4 loudspeakers in parallel on each channel of a standard 4 Ohm amplifier.
In 100 volt line use, transformer tappings are set at 2.5, 5, 10 and 20 Watts.
The housing is made of high quality ABS and has a 6 ½ inch woofer and 1inch tweeter. The woofer is made out of polypropylene, making it moisture-proof. The new enforced structure of the woofer cone results in an even clearer sound.
The loudspeaker is easy to install, due to its simple, quick mounting system (4 screws which are hidden behind the loudspeaker grill, which gives the loudspeaker a modern and striking design).
| Frequency Range | 60Hz to 20kHz (±3dB) |
| 100V: | 20W, 10W, 5W, 2.5W |
| Sensitivity | 92dB-SPL @ 1W, 1m (pink noise) |
| Mechanical Specifications | |
| Ceiling hole cutout: | 176 x 176 mm |
| Outer flange dimensions: | 201 x 201 mm |
| Depth: | 6.25 in (15.9 cm) 75mm |
| Weight |
1.5kg |